300 t/h Conveying Capacity Dense Phase Conveying Pumps from PCD Model Process
Product Introduction:
The bin pump, also known as the bin type pneumatic conveying pump, uses a positive pressure pneumatic conveying method to transport powder and granular materials. It is suitable for conveying powder and granular materials such as fly ash, cement, casting sand, mineral powder, grain, chemical raw materials, etc. in power plants. The conveying pipeline can be arranged according to specific terrain to achieve centralized, dispersed, high height, and long-distance transportation. The conveying process is not affected by climate conditions, and can ensure that the materials are not affected by moisture, which is beneficial for production and environmental protection. This device is equipped with an automated operating platform, which can achieve manual and automatic control. The automatic control adopts two forms: relay or PLC microprocessor. It has stable performance, reliable quality, and no dust pollution, making it an ideal pneumatic conveying equipment.
The cone pump feeding system is divided into downdraft and updraft based on different materials and working conditions. The tank body of the cone pump holds the pressure vessel and requires regular safety inspections to ensure normal use.
System features:
1. The equipment has a simple structure, small footprint, and low maintenance costs.
2. Equipped with complete facilities, equipped with an automated operating platform, capable of achieving manual or PLC automated control, and flexible operation.
3. The conveying pipeline can be flexibly arranged.
The working process of the warehouse pump is divided into four stages:
Feeding stage: The feeding valve and exhaust valve are opened, and the material freely falls into the pump body. When the material is full, the level gauge sends a signal, and the feeding valve and exhaust valve automatically close to complete the feeding process;
Fluidization and pressurization stage: Open the intake valve, compressed air enters the upper and bottom of the pump body, pressurizes the upper part, and diffuses the lower air through the fluidized bed, causing the material to be in a fluidized state, while the pressure inside the pump increases;
Transportation stage:
When the pressure inside the pump reaches a certain value, the pressure gauge or pressure switch sends a signal, and the discharge valve automatically opens. The material fluidization on the fluidized bed strengthens, and transportation begins. The material inside the pump gradually decreases. At this time, the material on the fluidized bed is always in a state of fluidization and transportation;
Purging stage:
When the material in the pump is delivered and the pressure drops to the resistance of the pipeline, the pressure gauge or pressure switch sends a signal, and the ventilation continues for a certain time. Compressed air is used to clean the pipeline, and then the inlet valve is closed. At a certain interval, the discharge valve is closed, and the inlet valve is opened to complete a conveying cycle.
Main features of the product
① Large conveying capacity: ＞ 300t/h;
② Long distance: ＞ 2000m;
③ Low power consumption: ＜ 3.8kWh/t · km;
④ Low wear and tear: pipeline life>10 years;
⑤ Low speed: initial speed 6-10m/s;
⑥ High mixing ratio: ＞ 30kg/kg;
⑦ Flexible process layout, dust-free, high operation rate, lower investment compared to mechanical conveying, and lower maintenance costs
After-sale Service
We have a long-term service team for the production line, with good technology and responsible after-sales service. All members have over 5 years of work experience and are able to provide timely, efficient, and comprehensive scientific after-sales service to customers. We can provide customers with after-sales service throughout the entire process of self engineering construction, production line equipment installation, production line debugging, until the production line meets the standards and reaches production capacity, solving various difficulties and miscellaneous problems encountered by customers, and providing thoughtful, meticulous, and comprehensive after-sales service.
Packaging and delivery
1. Standard packaging.
2. A well-trained and disciplined packaging team.
3. After sales service. After receiving the product, if you have any questions or questions, please feel free to contact us at any time. The problem will be resolved immediately for you.
4. Experienced and professional logistics agents.
Large Capacity Pneumatic Conveying Bin Pump Parameter Table
| Conveying Material | Bulk Density (t/m3) | Model | PCD24/H | PCD26/H | PCD28/H | PCD30/H | Conveying Distance |
| Specification | 16~20m3 | 18~22m3 | 20~27m3 | 26~32m3 | Level (m) | Level (m) |
| Pulverized Coal | 0.5 | Delivery Volume (t/h) | 50~80 | 60~90 | 65~110 | 80~130 | 200 | 20 |
| Fly Ash | 0.75 | 75~125 | 85~130 | 95~160 | 125~190 | 200 | 20 |
| Limestone Powder/Mineral Powder | 0.8 | 80~130 | 90~140 | 100~170 | 130~200 | 200 | 20 |
| Cement/Raw Meal | 1 | 100~150 | 115~175 | 130~215 | 165~260 | 200 | 20 |
Long-distance Pneumatic Conveying Bin Pump Parameter Table
| Conveying Material | Bulk Density (t/m3) | Model | PCD24/L | PCD26/L | PCD28/L | PCD30/L | Conveying Distance |
| Specification | 16~20m3 | 18~22m3 | 20~27m3 | 26~32m3 | Level (m) | Level (m) |
| Pulverized Coal | 0.5 | Delivery Volume (t/h) | 20~40 | 25~45 | 30~55 | 45~65 | 1000 | 25 |
| Fly Ash | 0.75 | 35~60 | 45~65 | 45~80 | 65~95 | 1000 | 25 |
| Limestone Powder/Mineral Powder | 0.8 | 40~65 | 45~70 | 50~85 | 70~100 | 1000 | 25 |
| Cement/Raw Meal | 1 | 50~80 | 55~90 | 65~110 | 90~120 | 1000 | 25
|
Conventional Grid Pneumatic Conveying Bin Pump Parameter Table
| Conveying Material | Bulk Density(t/m3) | Model | PCD18/N | PCD20/N | PCD20/N | Reference Conveying Distance |
| Specification | 5.0~6.7m3 | 7.0~10.0m3 | 10.0~15.0m3 | Level (m) | Vertical (m) |
| Pulverized Coal | 0.5 | Delivery Volume (t/h) | 12~20 | 16~32 | 25~50 | 500 | 30 |
| Fly Ash | 0.75 | 18~32 | 25~48 | 35~70 | 50 | |
| Limestone Powder/Mineral Powder | 0.8 | 20~35 | 26~51 | 38~75 | 500 | 30 |
| Cement/Raw Meal | 1.0 | 24~42 | 32~65 | 48~95 | 500 | 30 |
| Silicon Powder | 1.2 | 28~50 | 40~75 | 55~115 | 500 | 30
|
Parameter Table Of Small Size Pneumatic Conveying Bunker Pump
| Material | Bulk Density(t/m3) | Model | PCD08/M | PCD10/M | PCD12/M | PCD14/M | Reference Conveying Distance |
| Specification | 0.2~0.5m3 | 0.6~1.6m3 | 1.5~2.5m3 | 2.5~5.0m3 | Level (m) | Vertical (m) |
| Pulverized Coal | 0.5 | Delivery Volume (t/h) | 0.5~1.8 | 1.5~5.5 | 5.0~9.0 | 8.0~18.0 | 100 | 20 |
| Fly Ash | 0.75 | 0.9~2.8 | 2.5~8.5 | 7.0~14.0 | 12.0~27.0 | 100 | 20 |
| Limestone Powder/Mineral Powder | 0.8 | 1.0~3.0 | 3.0~9.0 | 8.0~15.0 | 12.0~28.0 | 100 | 20 |
| Cement/Raw Meal | 1.0 | 1.2~3.5 | 3.5~11.5 | 10.0~18.0 | 16.0~36.0 | 100 | 20 |
| Silicon Powder | 1.2 | 1.5~4.0 | 4.5~13.5 | 12.0~20.0 | 19.0~43.0 | 100 | 20 |
Product Tags:
|
|
300 T/H Conveying Capacity Dense Phase Conveying Pumps From PCD Model Process Images
|
